A SERVICE OF

logo

Chapter 2 Hardware Installation and Connections
IES-5106M / IES-5112M / IES-6000M User’s Guide
49
Figure 39 Installation Overview Example
You can also attach RJ-11 connectors to the Telco-50 cable and connect directly to
a DSL modem(s) or patch panel. The following sections describe typical
installation scenarios.
2.6.4.1 MDF Installation Scenario A
You want to install the IES in an environment where there are no previously
installed MDFs. There is no phone service and you want to install the IES for data-
access only. No connection from the Telco-50 CO connector is necessary. G.SHDSL
connections carry data only, thus they are best suited to this installation scenario.
You may connect using an MDF or attach RJ-11 connectors to the non-IES end of
the Telco-50 cable and then connect to DSL modems directly.