A SERVICE OF

logo

Chapter 4 Maintenance
IES-5106M / IES-5112M / IES-6000M User’s Guide
72
Figure 61 Removing the IES-6000M Air Filters
4.2 Power Maintenance
This section describes how to change the power modules. The power modules
have a built-in circuit breaker. Before you replace a power module, make sure the
circuit breaker is not causing the problem.
4.2.1 Procedure to Disconnect the Power
The power modules are hot-swappable and can be disconnected from the power
supply individually.
1 Make sure that the power module you want to disconnect has the power switch in
the OFF position.
2 Turn off the power supply.
3 Disconnect the power wires from the power supply’s power terminals.