Chapter 1 Introduction
PMG1006-B20A User’s Guide
6
• Back up the configuration (and make sure you know how to restore it). Restoring an earlier
working configuration may be useful if the GPON Device becomes unstable or even crashes. If
you forget your password, you will have to reset the GPON Device to its factory default settings.
If you backed up an earlier configuration file, you would not have to totally re-configure the
GPON Device. You could simply restore your last configuration.
1.4 LEDs (Lights)
The following graphic displays the labels of the LEDs.
Figure 2 LEDs on the Top Panel
None of the LEDs are on if the GPON Device is not receiving power.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
POWER Green On The GPON Device is receiving power and is ready for use.
Off The GPON Device is not receiving power or has malfunctioned.
PON Green On The GPON Device has a PON line connection.
Orange On The GPON Device’s PON port is physically connected but not registered.
Red On The GPON Device’s PON port is not connected. The optical transceiver may
have malfunctioned or the fiber cable may not be connected or may be
broken or damaged enough to break the PON connection.
ALARM Red On An equipment failure has occurred.
Off The GPON Device has not detected an equipment failure.
10/100/
100 1~4
Orange On The GPON Device has a 1 Gb Ethernet connection with another device
(such as a computer) on the Local Area Network (LAN) through this port.
Blinking The GPON Device is sending/receiving data to/from the LAN through this
port.
Green On The GPON Device has a 100 Mb Ethernet connection with another device
on the LAN through this port.
Blinking The GPON Device is sending/receiving data to/from the LAN through this
port.
Red On The GPON Device has a 10 Mb Ethernet connection with another device on
the LAN through this port.
Blinking The GPON Device is sending/receiving data to/from the LAN through this
port.
Off The GPON Device does not have an Ethernet connection with the LAN
through this port.
DUPLEX
1~4
Green On The Ethernet port has a full duplex connection.
Orange On The Ethernet port has a half duplex connection.
