Chapter 6 Basic Setting
VES-1616F-3x Series User’s Guide
73
Figure 23 Port Setup
The following table describes the labels in this screen.
Table 13 Port Setup
LABEL DESCRIPTION
Ports 1 .. 16
Port This is the port index number.
Active Select this check box to enable a port. The factory default for all ports is enabled. A
port must be enabled for data transmission to occur.
Name Enter a descriptive name that identifies this port. You can enter up to 64 alpha-
numerical characters.
Note: Due to space limitation, the port name may be truncated in
some web configurator screens.
Type This field displays VDSL for the VDSL ports.
Profile Select a VDSL line profile from the drop-down list box.
This field displays the profile names you configure in the VDSL Profile Setup screen.
Refer to Section 6.9 on page 77 for more information.
PSD Profile Select a VDSL PSD profile from the drop-down list box.
This field displays the profile names you configure in the VDSL PSD Profile Setup
screen. Refer to Section 6.11 on page 82 for more information.
Alarm Profile Select a VDSL alarm profile from the drop-down list box.
This field displays the alarm profile names you configure in the VDSL Alarm Profile
Setup screen. Refer to Section 6.10 on page 80 fore more information.
