A SERVICE OF

logo

Connection Rates
8-3
Connection Rates
You can set the Business Modem to a fixed or variable connection rate for
data calls. Set a variable rate to have the Business Modem negotiate with
the remote device for the highest possible connection rate. Set a fixed
rate to connect only at a specified rate. You might use a fixed rate to filter
calls for security or other reasons.
Example:
Sending
AT&N8
will only allow connections with remote devices
that are operating at 14.4 Kbps.
To allow your modem to Set connection rate as Command
Negotiate for the highest possible rate. Variable
AT&N0
Connect only if the remote device is
operating at the rate you specify. See
below.
Fixed
AT&N1
-
AT&N16
To connect at this
rate
Command
To connect at this
rate
Command
300 bps
AT&N1
16.8 Kbps
AT&N9
1200 bps
AT&N2
19.2 Kbps
AT&N10
2400 bps
AT&N3
21.6 Kbps
AT&N11
4800 bps
AT&N4
24.0 Kbps
AT&N12
7200 bps
AT&N5
26.4 Kbps
AT&N13
9600 bps
AT&N6
28.8 Kbps
AT&N14
12.0 Kbps
AT&N7
31.2 Kbps
AT&N15
14.4 Kbps
AT&N8
33.6 Kbps
AT&N16