A SERVICE OF

logo

Transmit-Data Flow Control
11-5
Transmit-Data Flow
Control
This type of flow control is for data transmitted to the Business Modem
by its attached computer.
For your modem to Command
Disable transmit data flow control
AT&H0
Enable Hardware flow control.
Requires that your computer and software support
Clear to Send (CTS) at the EIA-232 interface.
AT&H1
Enable Software flow control.
Requires that your software support XON/XOFF
signaling.
AT&H2
Use both hardware and software flow control.
If you are unsure about what your equipment supports,
select this option.
AT&H3