A SERVICE OF

logo

Remote Programming Maintenance
Setting Up Equipment for Remote
Maintenance
1
2
3
To setup equipment for remote maintenance, follow the steps below while
referring to Figure 1–3 and to Installation.
Connect the PC and modem.
If you have an external modem, use an EIA-232-D cable.
If you have an internal modem, the connection is already established.
Use a D8W cord to connect the modem to a T/R trunk jack.
Use a D8W cord to connect the modem to a T/R telephone.
LINE jack
PHONE jack
EIA-232-D
EXTERNAL
MODEM
PC running SPM
T/R jack
D8W cord
\
D8W cord
T/R telephone
Figure 1-3. External Modem Setup
Introduction 1-7