Canon ipf6300 Manual

A SERVICE OF

next previous

Roll Holder Set

Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-24 is for

use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core. For borderless printing

on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder. (See "Load-

ing Rolls on the Roll Holder.")

→P.718

• Roll Holder Set RH2-24

• Roll Holder (for 2- and 3-inch paper cores)

• Attachments

Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core

Holder Stopper (for 2-inch paper cores) Holder Stopper (for 3-inch paper cores) 3-Inch Paper Core Attachment

• Borderless Printing on A1 or A2 Rolls

Spacer for Borderless Printing

Removing the Roll Feed Unit

Important

• Always turn off the printer before removing the Roll Feed Unit.

1. Remove the roll from the Roll Feed Unit. (See "Removing the Roll from the Printer.") →P.728

Handling Paper

>

Handling rolls

>

iPF6300 Roll Holder Set

6

743