Printheads
Printhead ......................................................................................................................................................... 909
Checking for Nozzle Clogging ......................................................................................................................... 909
Cleaning the Printhead .................................................................................................................................... 910
Replacing the Printhead .................................................................................................................................. 911
Printhead
• Printhead PF-05
Note
• For instructions on replacing the Printhead, see "Replacing the Printhead." →P.911
Checking for Nozzle Clogging
If printing is faint or affected by banding in different colors, make sure the Printhead nozzles are clear by printing a test
pattern to check the nozzles.
Note
• Nozzles are periodically checked to ensure they are clear. Configure the settings on the Control Panel menu
in Nozzle Check. (See "Menu Settings.") →P.838
1. Load unused paper.
• Loading Rolls on the Roll Holder →P.718
• Loading Rolls in the Printer →P.722
• Loading Sheets in the Feed Slot →P.747
2. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).
Maintenance
>
Printheads
>
iPF6300 Printhead
10
909
