A SERVICE OF

logo

142
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Connecting to the Storage
Installing the SANSurfer iSCSI GUI
Note: This example in this section uses a v5.x-series driver. The same basic
steps would apply for the v3.x-series driver.
To install the SANSurfer iSCSI GUI, complete the following steps:
1. Download the QLogic iSCSI SANsurfer GUI package from the
EMC-approved webpage on the QLogic webpage at
www.qlogic.com, as shown below.
The Sansurfer (ISCSI HBA Manager - Standalone) window
diplays.
2. Click Next.