Fibre Channel and FCoE in kernel driver versions
49
Installing and Configuring the Linux Host with the QLogic Driver
Fibre Channel and FCoE in kernel driver versions
The following installation information is contained in this section:
◆ “Supported in kernel driver versions” on page 49
◆ “Installation instructions for the in kernel QLogic driver for Linux
2.4.x kernel” on page 53
◆ “Installation Instructions for the in kernel QLogic driver in Linux
2.6.x kernels” on page 55
Supported in kernel driver versions
Note: QLogic CNAs are not supported within kernel drivers. Refer to the
“Installation instructions for the out of kernel QLogic driver” on page 61 for
more information.
Table 4 lists some examples of supported operating systems in kernel
driver versions.
Table 4 Supported FC and FCoE in kernel driver versions (page 1 of 4)
OS Driver version Supported adapters
1/2 Gb 4 Gb 8 Gb CNA
RHEL 3 U2 6.07.02-RH2
√
SLES 8 SP3 6.05.00
√
RHEL 3 U4
RHEL 3 U5
7.01.01-RH1
√
SLES 8 SP4 7.03.00
√
RHEL 3 U8
RHEL 3.9
Asianux 1.0 SP3
7.07.04b6
√√
Miracle Linux SE 4.0
RedFlag DC Server 5.0
Haansoft Linux 2006 Server
8.00.03b1
√
