A SERVICE OF

logo

179
Using wireless Ethernet in Windows XP
www.gateway.com
7 Click the General tab.
8 If you are using a DHCP server, click Obtain an IP address automatically.
- OR -
If you are not using a DHCP server, click
Use the following IP address, then
type the IP address in the
IP address box and Subnet mask in the Subnet
mask
box.
9 Click OK to close the Internet Protocol (TCP/IP) Properties dialog box.
10 Click OK to close the Wireless Network Connection Properties dialog box.
11 Click X to close the Network Connections window.
Important If you are required to type an IP Address and Subnet Mask,
ask your network administrator for the correct values.