A SERVICE OF

logo

258
Chapter 15: Upgrading Your Notebook
www.gateway.com
6 Hold the new or replacement module at a 30-degree angle and press it
into the empty memory slot. This module is keyed so that it can only
be inserted in one direction. If the module does not fit, make sure that
the notch in the module lines up with the tab in the memory bay.
7 Gently push the module down until it clicks in place.
8 Replace the memory bay cover and cover screw, insert the battery,
connect the power adapter and modem and network cables, and turn on
your notebook.
Important Use only memory modules designed for the Gateway
Solo 1450.