28 Case Access
To remove the bezel:
1 Grip the bezel at both sides and pull it straight out from the front panel.
Removing the back top panel
The back top panel provides access to the hot-swap fans, the hot-swap PCI
slots, the memory card, the processors and VRMs, and the standard PCI slots.
To remove the back top panel:
1 Observe all safety and static electricity precautions, see “Preventing static
electricity discharge” on page 25.
Important You do not have to turn off the server to open the back
top panel. However, do not remove the EMI foam from the
electronics bay unless you have turned the server off and
unplugged the power cord.
8506284.book Page 28 Thursday, July 13, 2000 11:43 AM
