A SERVICE OF

logo

Opening the case 29
2
Loosen the two thumbscrews from the top edge of the back panel.
3 Slide the top panel slightly to the back, disengaging the front edge of
the panel from the front top panel.
4 Lift the panel out and away from the chassis.
Removing the front top panel
The front top panel provides access to the hot-swap drive cage, the drive
cables, the power supply cables, and the front panel board.
To remove the front top panel:
1 Turn off the server and disconnect all power cords.
2 Observe all safety and static electricity precautions, see “Preventing static
electricity discharge” on page 25.
Thumbscrew
Thumbscrew
8506284.book Page 29 Thursday, July 13, 2000 11:43 AM