A SERVICE OF

logo

Replacing the hot-plug PCI indicator board 97
Replacing the hot-plug PCI indicator
board
The hot-plug PCI indicator board is mounted on the back panel of the chassis,
above the hot-plug PCI slots.
To replace the hot-plug PCI indicator board:
1 Turn off the server and disconnect the power cord and all external
peripherals.
2 Remove the back top panel. (See “Removing the back top panel” on
page 28 and “Preventing static electricity discharge” on page 25.)
3 Disconnect the cable from the hot-plug PCI indicator board. Note the
location and orientation of the cable as you remove it.
4 Remove the two thumbscrews that secure the board to the back panel,
then remove the board from the server.
8506284.book Page 97 Thursday, July 13, 2000 11:43 AM