A SERVICE OF

logo

4 Quick Installation
Quick Installation
NOTE
See chapter 2 for detailed information.
1. If you have a Token Ring card,
Set the network Data-Rate
switch to 16 Mbps (default)
or 4 Mbps depending on your
network. If you don't know the
network data rate, ask your
network administrator.
2. Before installing the card, verify that your printer
works.
Print a test page or configuration plot. For instructions,
see chapter 2 or refer to your printer manuals.
3. Turn off your printer and insert the card.
Then connect the network
cables.
(See next page)
4 Mbps
16 Mbps
Token Ring data-rate switch