EN
Removing Assemblies
6-43
Paper Feed Roller Assembly
1
Remove the Top Cover (page 6-12), Left Side Cover (page 6-23),
Main Gear Assembly (page 6-34), Paper Handling PCA
(page 6-31), and Pickup Gear Assembly (page 6-36).
2
Remove the Paper Feed Roller Clutch (C) located on the left side
of the Paper Feed Roller Assembly, below the Registration
Assembly Clutch. Remove the E-Clip on the clutch, and slide the
clutch off the shaft. If necessary, free the cable from the retaining
clip on the inside of the chassis, behind the Left Corner Cover.
See Figure 6-28 on page 6-36.
Figure 6-34
Paper Feed Roller Clutch (left side view of printer)
Item Explanation
A
Tray 1 Shaft Gear
B
Registration Assembly Clutch
C
Paper Feed Roller Clutch
D
Tray 2 Shaft Gear
E
Wire Clip
