A SERVICE OF

logo

EN
Troubleshooting the Printing System
7-27
13.5 PAPER JAM
13.05 Paper delay jam at Fuser.
For
13.5
and
13.6
:
1. Check the Transfer
Roller and Small Media
Belt to ensure they are
operating and can feed
paper.
2. Check the paper path
for obstructions at the
Transfer Roller and Toner
Cartridge, at the Paper
Feed Guide, and at the
Fuser.
3. Check PS1307 for
proper operation.
Replace any defective
sensors or flags. For
locations of sensors, see
page 7-88.
13.6 PAPER JAM
13.06 Paper stopped jam at
Fuser.
13.10 PAPER JAM
13.10 or
13.22
Paper delay jam at paper
reversing area.
Paper jam at duplexer.
1. Check the Duplexer and
the rear area of the printer
for obstructions or
damage.
2. Check PS1701 and
PS1703 in the Duplexer
for proper operation.
Replace the Duplexer if a
sensor is defective.
Table 7-6. Numerical Printer Messages (continued)
Control Panel
Message
Event
Log
Message
Explanation Recommended
Action