Software Fixes Release Notes for 07.8.04
58
36440 Module: N/A
Symptom: The Switch or Router forwards the
packet with Destination MAC address of
01:80:c2:00:00:0x. These packets should be
discarded.
Resolution: Fixed in this release.
Layer 2 07.8.04a
81853 Module: N/A
Symptom: The switch or router incorrectly floods
the Multicast packets to the entire VLAN when a
static MAC address is configured to forward to
specific ports.
Resolution: Fixed in this release.
Layer 2 07.8.04a
72324 Module: N/A
Symptom: In a Router configured with OSPF, if a
static route that replaces a summary route is
configured using the summary-address command,
removing the static route does not restore the
summary route.
Resolution: Fixed in this release.
OSPF 07.8.04a
65123,
69858
Module: N/A
Symptom: In a Router, the static route redistribution
does not work when a route with conflicting LSID is
added to an existing host route with same LS ID.
Resolution: Fixed in this release.
OSPF 07.8.04a
72815,
78978
Module: N/A
Symptom: In a Router configured with OSPF, a non-
ABR router incorrectly generates a Summary LSA
when an interface goes down.
Resolution: Fixed in this release.
OSPF 07.8.04a
82228 Module: N/A
Symptom: In a Router with SSH configured, a
PSCP client cannot use SCP to copy a
configuration file bigger than 100K.
Resolution: Fixed in this release.
CSP 07.8.04a
82290 Module: N/A
Symptom: Occasionally, the system performs a
reset when reading port traffic counters in a Switch
or Router configured with sFlow using sflow traffic-
monitor enable.
Resolution: Fixed in this release.
sFlow 07.8.04a
Bug ID Bug Description Protocol/
Feature
Version
Found
Version
Fixed
