Control panel message Description Recommended action
OUTPUT BIN FULL
Remove all paper
from bin
Remove all paper. The output bin is full
and must be emptied for printing to
continue.
Remove all paper from the output bin to
continue printing.
Paused
To return to ready
press Resume key
The printer is paused, and there are no
error messages pending at the display.
The I/O continues receiving data until
memory is full.
Press P
AUSE
/R
ESUME
.
Performing
CALIBRATION
The printer is calibrating. No action necessary.
Performing
PAPER PATH TEST
The printer is performing a Paper Path
Test.
No action necessary.
Performing
PRINT/STOP TEST
The printer is performing a Print/Stop
Test.
No action necessary.
Performing
upgrade
A firmware upgrade is in process. No action necessary. Do not turn off the
printer.
Please wait The printer is in the process of clearing
data.
No action necessary.
Powersave on The printer is in the Powersave mode.
Any button press or the receipt of data
will clear Powersave and execute the
action.
No action necessary. The printer will
automatically exit Powersave.
Printing...
CONFIGURATION
The printer is generating the
configuration page. The printer will return
to the online Ready state when the page
is completed. No action necessary.
No action necessary.
Printing...
DEMO
The printer is generating the demo page.
The printer will return to the online Ready
state when the page is completed.
No action necessary.
Printing...
EVENT LOG
The printer is generating the event log
page. The printer will return to the online
Ready state when the page is
completed.
No action necessary.
Printing...
FILE DIRECTORY
The printer is generating the mass
storage directory page. The printer will
return to the Ready state when the page
is completed.
No action necessary.
Printing...
FONT LIST
The printer is generating either the PCL
or PS personality typeface list. The
printer will return to the Ready state
when the page is completed.
No action necessary.
Printing...
MENU MAP
The printer is generating the printer menu
map. The printer will return to the Ready
state when the page is completed.
No action necessary.
ENWW Control panel messages 125
