Installation on Windows
Installation Guide 43
30 With the printer icon highlighted, choose File > Properties to open the Properties dialog
box.
31 Choose the Ports tab, click once
on the port for the printer, and
then click the Configure Port
button.
32 Click on the Enter Network
Address box.
33 Enter the name or IP address of
the printer or print server.
For best results with a print
server and DHCP, use the print
server name (not the IP address,
which the network can change).
34 Click the Test button. Wait to see
the “Successfully communicate . .
“ message and then click OK to close the message. If the PC does not communicate
with the printer, see
"Installation Troubleshooting".
35 Click OK to close the Enter Network Address dialog box.
36 On the General tab of the Properties dialog box, click "Print Test Page" to print the
Windows test page.
37 Verify that the Windows test page prints. The image on the card is
likely to be cropped; this is expected.
38 Click OK when the card prints, and then close the Properties
dialog box.
If you have not restarted the PC and the printer, the Windows test
page might not print or might cause an error at the printer. Restart
the printer: Do not follow Windows troubleshooting.
To continue, see "Set up the Unidirectional Printer".
