Sense Data Values
139ESL E-Series Tape Library User’s Guide
B8C 01LOAD PORT LATCH FAILURE
The load port door was unlocked, but did not leave its current
position before time-out (30 seconds). This may be due to the door
being stuck, or in the case of a close operation, the operator not
moving the door.
48C06LOAD PORT DOOR OPEN
Load port door unlocked but failed to open.
48E 03CABINET CONTROLLER UNABLE TO UPLOAD
Unable to upload firmware to the cabinet controller.
48E 04ROBOTICS CONTROLLER UNABLE TO UPLOAD
Unable to upload firmware to the robotic controller.
B8F00LIBRARY UNIT COMMAND TIMED OUT
Verify that communications to library still exists by issuing another
command.
4 F3 02 DRIVE COMMUNICATION TIMEOUT
The library is unable to communicate with a drive.
4 F3 20 DRIVE UNLOAD FAILED OR TIMED OUT
The command to the drive to unload the tape failed to complete or
timed out.
4 F3 21 DRIVE EJECT FAILED OR TIMED OUT
The command to the drive to eject a tape failed to complete or time
out.
4 F3 22 DRIVE LOAD FAILED OR TIMED OUT
The command to the drive to load a tape failed to complete or timed
out.
4 F3 23 DRIVE THREAD FAILED OR TIMED OUT
The command to the drive to thread a tape failed or timed out.
Table 22: Sense data values (Hexadecimal) (Continued)
Sense
Key
ASC ASCQ Message Name/Description
