PAYCLOCK USER’S GUIDE
12
Follow the Setup Steps
• It may take the install a few minutes to start, please be
patient.
• From the USB Terminal Manager installation window click
on Next.
• At the Choose Terminal selection window, select the USB
terminal that will be connected to the computer and then
click Next to move forward.
• At the Ready to Install screen, click Next.
Device Driver Installation - Windows XP
• This window will display 2 times with the options “Continue
Anyway” or “Stop Installation”, be sure to select Continue
Anyway. Note: The device drivers for the terminal will not
be installed if you select Stop Installation.
Connect the PayClock USB terminal to the Computer
• Connect the USB cable coming from the PayClock USB
terminal to an available USB port on your computer when
prompted. See example below.
• Do not click Next, wait for the drivers to be loaded
automatically.
