Matrix GLK24064-25 Manual

A SERVICE OF

next previous

2.5 Manual Override

The Manual Override is provided to allow the GLK24064-25 to be reset to factory defaults. This can be

particularly helpful if the display module has been set to an unknown baud rate or I

2

C Slave Address and

you are no longer able to communicate with it. If you wish to return the module to its default settings you

must:

1. Power off the display module.

2. Place a Jumper on the Manual Override pins 1 and 2 as pictured below.

3. Power up the display module.

4. The display module is now set to its default values listed below in table 2.

5. Edit and save settings.

Figure 18: Manual Override Jumper

Table 2: Default Values

Contrast 128

Backlight 255

Baud Rate 19.2 kbps

I

2

C Slave Address 0x50

Data Lock False

RS232AutoTransmitData True

NOTE The display module will revert back to the old settings once turned off, unless the

settings are saved.

Matrix Orbital GLK24064-25 12