Maxtor Atlas 10K V 5-131
0x06
Unit Attn
0x0B 0x01 SMART overtemperature trip
0x28 0x00 Not Ready to Ready transition
0x29 0x01 Power-On-Reset occurred
0x29 0x02 SCSI bus reset occurred
0x29 0x03 Bus device reset message
0x29 0x04 Recovered from bug check
0x29 0x05 Bus mode changed to single ended
0x29 0x06 Bus mode changed to LVDS
0x29 0x86 Reset after too many ACK's
0x2A 0x01 Mode parameters were changed
0x2A 0x02 Log parameters were changed
0x2A 0x03 Persistent Reservations were cleared
0x2A 0x04 Persistent Reservations were released
0x2A 0x05 Registration Preempted
0x2f 0x00 Cmd Queue cleared by another initiator
0x3f 0x01 Microcode has been changed
0x3f 0x05 Device Identifier changed
0x5C 0x01 Spindle synced
0x5C 0x02 Spindle not synced
0x5D 0x00 Smart triggered
0x5D 0x01 Smart triggered due to Write TA Factor
0x5D 0x02 Smart triggered due to Write Err Factor
0x06
Unit Attn
0x5D 0x5B Smart triggered due to spin retry
0x5D 0x80 Smart test tripped
0x5D 0xFF Smart test tripped
0x07
Data Protect
0x27 0x00 Data write protected
0x09
Vendor Specific
0x81 0x00 New command overlaps deferred write error
0x81 0x01 New wrt cmd overlaps deferred write
0x81 0x02 New rd cmd overlaps deferred write
0x81 0x03 New rd cmd overlaps deferred read error
Sense
Key
Sense
Code
Sense
Qualifier
Meaning
