FM/AM/XMா RADIO WITH CD CHANGER (if so equipped)
Ⅲ Pressand hold the RPT button for approximately 2 seconds until the clock display starts
to flash.
Ⅲ Press the SEEK/TRACK button to adjust the hours.
Ⅲ Press the TUNE/REW/FF button to adjust the minutes.
Ⅲ Press the RPT button again to exit the clock set mode.
TRIP COMPUTER
The trip computer may be used to check items such as speed,
outside air temperature, distance to empty (fuel), average mile-
age and speed, elapsed time and distance traveled. Additionally,
it can function as a stopwatch or be used to operate the RPM
shift feature (REV) (Manual transmission only).
Ⅲ The twin trip odometer records the distance of individual
trips.
Ⅲ Press the button
to change the display as follows: Trip
A → Trip B → Trip A.
Ⅲ Press and hold the button for more than 1 second to reset
the trip odometer to zero.
TO OPERATE THE TRIP COMPUTER
Turn the ignition switch ON. Then press the side of the buttons.
Ⅲ Press the button
toward the left to scroll through each
mode.
Ⅲ Press the button toward the left to reset or adjust the various mode selections.
AUTOMATIC TRANSMISSION (if so equipped)
MANUAL SHIFT MODE
Ⅲ Whenthe shiftselector lever isshifted from D(Drive)
to the manual shift gate, the transmission enters the
manual shift mode.
Ⅲ In the manual shift mode, shift range is displayed on
the position indicator in the meter.
WHEN SHIFTING UP
Move the shift selector lever to the + (up) side. (Shifts to higher range.)
10
