Mist (MIST) – Lift the lever up for one sweep of the front wipers.
Rear Wipers (REAR) – Twist the end section to operate the first (INT) or second
(ON) speed settings for the rear wipers.
Ⅲ The washer function activates the washer fluid and several sweeps of the wipers:
● For FRONT WASHER, pull lever toward you.
● For REAR WIPER, push lever away from you.
HEADLIGHT AND TURN SIGNAL CONTROL
HEADLIGHT CONTROL SWITCH
Ⅲ Turn the headlight control switch to the
position to turn on the front parking, tail, license plate
and instrument panel lights.
Ⅲ Turn the headlight control switch
to the po-
sition to turn on the headlights. All other lights remain
on.
FOG LIGHT OPERATION
NOTE: The headlights must be on and the low beams selected for the fog lights to operate.
Ⅲ Turn the switch (inside collar)
to the position to turn on the fog lights.
Ⅲ Turn the switch (inside collar)
to the OFF position to turn off the fog lights.
TURN SIGNAL SWITCH
Ⅲ Move the headlight control switch up or down to
signal a turning direction. When the turn is completed,
the turn signals cancel automatically.
Ⅲ To signal a lane change, move the headlight control
switch up or down
to the point where the indica-
tor lightbegins to flash,but the headlightcontrol switch
does not latch.
HIGH BEAM
Ⅲ Push the headlight control switch forward to
select the high beam function. The blue
indicator
light illuminates. Pull the headlight switch back to the
original position to select the low beam. The blue
indicator light goes off.
Ⅲ Pull and release the headlight control switch
to flash the headlight high beams on
and off.
3
