SEAT BELT WARNING LIGHT AND CHIME
Ⅲ Thelight andchime remind youto fasten yourseat belts. Thelight
illuminates whenever the ignition key is turned to the ON or
START position and remains illuminated until the driver’s seat
belt is fastened. At the same time, the chime sounds for approxi-
mately 6 seconds unless the driver’s seat belt is securely fas-
tened.
Ⅲ The seat belt warning light may also illuminate if the front pas-
senger’s seat belt is not fastened when the front passenger’s
seat is occupied.For 7 seconds afterthe ignition switch isin the ON position, thesystem
does not activate the warning light for the front passenger.
FRONT SEAT ADJUSTMENTS
With manual seats:
Ⅲ Pull up on the lever under the front of the
seat and slide backward or forward to the
desired position. Release the lever to lock
the seat in position.
Ⅲ Lift the lever on the side of the seat to adjust
your seatback forward or backward; release
when you have found a comfortable angle
and the seat belt fits properly.
Ⅲ Turn either dial to adjust the angle and height of the seat cushion to the desired position.
With power seats (if so equipped):
Ⅲ Move the sliding switch
forward or
backward to adjust the seat cushion to the
desired position.
Ⅲ Move the reclining switch
forward or
backward to adjust the seatback to the de-
sired angle.
Ⅲ Turn either dial to adjust the angle and height of the seat cushion to the desired position.
SEATBACK TILT CANCEL SWITCH (Roadster only)
The passenger seat of the 350Z Roadster automatically tilts forward
when operating the soft top. This function can be cancelled by
pushing the seatback tilt cancel switch to the CANCEL position.
Push the seatback tilt cancel switch to the AUTO position to reacti-
vate the power seatback tilt switch.
If the seatback tilt cancel switch is in the CANCEL position, the
seatback tilt paddle switch (located on the back of the passenger
seat) will not work. In this situation, tilt the passenger seatback
forward using the power seat position switch.
13
