44
TIMER SETTING
The timer recording mode is triggered by the internal or an
external timer.
This item lets you enable or disable the timer for recording.
1. Move the cursor to the TIMER parameter in the WJ-
HD500 SETUP menu by pressing the D or C button.
2. Select a parameter to be activated by pressing the +
or - button.
INT: Selects the internal timer for recording as sched-
uled in the programmed menu.
EXT: Selects the external timer for power on recording
when detecting power on and off.
OFF: Timer recording is disabled.
To record manually, set to this mode.
The factory default setting is OFF.
Note: When the parameter is set to something other
than OFF, the Disk Recorder does not start record-
ing even if the REC button is pressed.
