102
PLAYBACK OF BACKUP DATA
The stored images on the DVD-RAM disk for backup can
be played back on the Multiscreen Monitor.
The procedures described below are for playing back the
DVD-RAM disk.
Note: To enable this function, the AUTO COPY(ALARM)
and AUTO COPY(EMERGENCY) parameters on the
DVD menu must be set to OFF.
1. Insert the DVD-RAM disk to be played back into the
DVD Drive Unit.
2. Press the INDEX button to display the record list of the
Disk Recorder on the Multiscreen Monitor as shown
below.
3. Press the EL-ZOOM button to replace the list with the
DVD-RAM’s on the monitor.
Pressing the INDEX button will show List or Thumbnail.
4. Press the DISPLAY button to display the record list or
thumbnails with the search (SEARCH) editing area as
shown in the figure.
5. Move the cursor to the desired position in the search
editing area by pressing the A or B button.
6. Select the desired digit or month by pressing the + or
- button.
7. Repeat steps 5 and 6 to edit the other positions.
8. Press the PLAY/PAUSE button to start the search.
A list of records including the most recent recording will
appear on the monitor.
9. Rotate the Shuttle Ring clockwise or counterclockwise
to move to the next or previous page of the list on the
monitor.
Rotate the JogDial clockwise or counterclockwise to
move the cursor to the record to be displayed on the
monitor.
10. Press the PLAY/PAUSE button to start playback.
The list or thumbnail search window is closed and the
selected playback image appears on the monitor.
Caution: To unload the DVD-RAM disk, press the
COPY button for two seconds or more when none of
the menus and lists is displayed on the monitor,
“DVD UNLOCKED” appears on the monitor.
Then press the eject button on the DVD drive to
remove the disk.
Note: During playback of the DVD-RAM, the zooming
function by pressing the EL-ZOOM button is dis-
abled.
