93
■ Search Record Function
The Disk Recorder has two search functions.
The procedures below describe how to search and play
back records.
1. Select the group to be played back by pressing the
GROUP SELECT button.
2. Pressing the ALARM SEARCH button toggles the indi-
cator in the button on and off.
Selecting either mode will display the list as shown
below.
On: Displays only the Alarm (REC+ALM) and
Emergency Record List of the selected group.
Off: Displays all Record Lists for the selected group.
3. Press the INDEX button to display the list selected on
the Multiscreen Monitor as shown below.
Pressing the INDEX button will toggle the window
between List and Thumbnail search.
Notes:
• The displayed list can be switched to the selected
group by pressing the GROUP SELECT button.
• The display mode of the Record List can be
changed by pressing the ALARM SEARCH button
as explained in 2. above.
• If alarm and emergency records are selected while
displaying thumbnails, any thumbnails exceeding
255 are blacked out on the screen.
Thumbnails (up to 255) can be displayed by
searching according to the procedure described
below.
• Jump search
The recorded images can be searched by jumping to
the next recording from the currently selected record
number.
During playback, rotate the JogDial clockwise or coun-
terclockwise to move to the beginning of the next
record from the record number currently selected.
After jumping to the next recording, the Disk Recorder
resumes playback.
Note: Confirm that the indicator in the ALARM
SEARCH button is not lit by pressing the button.
Clockwise: Jumps to the beginning of the next record-
ing in a forward direction.
Counterclockwise: Jumps to the beginning of the next
recording in a backward direction.
• Alarm jump search
The recorded alarm images can be searched by jump-
ing to the next alarm recording from the currently
selected record while the ALARM SEARCH button is
on.
During playback, rotate the JogDial clockwise or coun-
terclockwise to move to the beginning of the next alarm
recording from the record currently selected.
After jumping to an alarm recording, the Disk Recorder
resumes playback.
Notes:
• Confirm that the indicator in the ALARM SEARCH
button is lit by pressing the button.
• The recorded alarm images that the TRIGGER
ACTION is set to REC+ALM are only enabled play-
back.
The recorded alarm images that the TRIGGER
ACTION is set to REC are disabled playback.
Clockwise: Jumps to the beginning of the next alarm
recording in a forward direction.
Counterclockwise: Jumps to the beginning of the next
alarm recording in a backward direction.
