7. Copy
53
7 CopyCopying
7.1 Making a copy
1 Open the document feeder tray (1), then
adjust the width of the document guides (2)
to fit the actual size of the document.
2 Insert the document (up to 10 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3 If necessary, press {A} or {B} repeatedly to
select the desired resolution.
4 Press {COPY}.
L The unit will start copying.
Note:
L When you copy a multiple-page document
which is longer than A4 size paper (approx.
300 mm), we recommend you insert one
page at a time.
L Any document which can be sent as a fax can
also be copied (page 41).
L The copied recording paper comes out
somewhat longer than the document size.
To select the resolution
Select the desired resolution according to the
type of document.
– “FINE”: For printed or typewritten
documents with small print.
– “SUPER FINE”: For documents with very
small print.
– “PHOTO”: For documents containing
photographs, shaded drawings, etc.
L If you select “STANDARD”, copying will be
done using “FINE” mode.
To stop copying
Press {STOP}.
2 1
{STOP}
{A}{B}
{COPY}
FC962HK-PFQX2283ZA-en.book Page 53 Thursday, September 15, 2005 4:20 PM
