Panasonic WJ-HD716K/G Manual

A SERVICE OF

next previous

40

Functions during playback (when using the buttons on the front panel)

Function Button Operation

Pause [PLAY/PAUSE]

button

 • Playbackwillresumewhenthisbuttonispressedduringpause.

 • The[PLAY/PAUSE]buttonwillblinkduringpausing.

Frame by frame play-

back/Reverse frame by

frame playback

Jog dial (Inside)  • Whenrotatingthejogdial(inside)duringpausing,frameby

frame playback will be performed.

 • Whenrotatingthejogdialclockwise,thenextframewillbedis-

played. When rotating the jog dial counterclockwise, the previ-

ous frame will be displayed.

Fast forward/Fast rewind Shuttle ring

(Outside)

 • Whenrotatingtheshuttlering(outside),theplaybackspeedwill

change (1/2x, 1x, 2x, 5x, 10x, 20x) according to how much

(angle) the shuttle ring is rotated.

When the playback continued at 20x (rotated the shuttle ring to

the end) for 10 seconds, the playback speed will change to

50x. When the playback continued at 50x for 10 seconds, the

playback speed will change to 100x.

 • Whenrotatingtheshuttleringclockwise,fastforwardplayback

will be performed. When rotating the jog dial counterclockwise,

fast reverse playback will be performed. When the shuttle ring

position is returned to the normal position (center), the play-

back speed will return to 1x.

Hold playback speed

(Fast forward/Fast

rewind)

[HOLD] button  • Whenthe[HOLD]buttonispressedwhilerotatingtheshuttle

ring (outside) during playback, the playback speed determined

by the shuttle ring position will be held. (Even when the shuttle

ring (outside) is released, playback will continue with the deter-

mined playback speed.) The indicator will blink during the hold

playback.

 • Whenthe[HOLD]buttonispressedduringtheplaybackspeed

is held, the held playback speed will return to x1.

Skip Jog dial (Inside)  • Whenthejogdial(inside)isrotatedduringplayback,playback

point will skip to the top of the next or previous recorded data

and start playback.

 • Whenrotatingthejogdial(inside)clockwiseduringplayback,

the playback point will skip to the top of the next recorded

data. When rotating the jog dial (inside) counterclockwise dur-

ing playback, the playback point will skip to the top of the pre-

vious recorded data.

 • Whentryingtoskipforwardevenduringreverseplayback,the

playback point will skip to the top of the next recorded data

(start time of the next recorded data). However, skipping to the

next recorded data works only this time and the subsequent

skip operation will not work.

 • Whennonextorpreviousrecordeddata,thecurrentplayback

will continue.

Skip to the latest record-

ed data

[GOTO LAST] button  • Whenthisbuttonispressed,playbackfromthetopofthelatest

recorded data will start. At the default, pressing this button

skips the playback point to a point that is 30 seconds before

the top of the latest recorded data.

Note: Playback of the latest recorded data may sometimes not

start when the [GOTO LAST] button is pressed during recording.

Multiscreen playback [MULTI SCREEN]

button

 • Pressthe[MULTISCREEN]button.Eachtimethe[MULTI

SCREEN] button is pressed, the screen pattern will change

according to the setting configured on the setup menu

("Camera setup" under "Multi screen setup" on the "Common"

tab under "Display" (☞ Installation Guide)).

Camera title display [OSD] button  • Pressthisbuttontodisplay/hidethecameratitleandthestatus

bar embedded on the recorded data. (☞ Page 30)