Panasonic WJ-HD716K/G Manual

next previous

Operate the camera

Step 1

Press the [SUB MENU] button on the front panel.

→ The submenu window will be displayed.

Step 2

Move the cursor onto the [Camera control] button of

the submenu, and then press the [SET] button.

→ The menu list will be displayed. Move the cursor

onto "Camera operation" on the displayed menu

list, and then press the [SET] button.

→ The [Pan/Tilt] tab of the camera control panel will

be displayed.

It is possible to operate the following camera operations when displaying live images from a camera with the

panning/tilting and zooming function.

 • Panning/Tilting Adjustthehorizontal/verticalpositionofimagesfromthecamera

 • Zoom Zoomin/outimagesfromthecamera

 • Focus Adjustthefocusofthecamera

 • Iris Adjustthelensirisofthecamera

 • Presetpositionfunction Registerpresetpositionsandmovethecameradirectiontotheregisteredpre-

set positio.

 • Autofunction Activatetheautofunctionofthecameraaccordingtothesettingsofthecamera

Note:

 • Thecameraoperationcanbeperformedonlywhendisplayingimagesona1-screenonmonitor1.

 • Dependingonthemodelofthecamera,someoperationsmaynotwork.

 • Whenauserwithahigheruserpriorityisoperatingatthesametime,itmaybeimpossibletooperatethe

camera.Inthiscase,theindication"BUSY"willbedisplayedontheoperationpanel.RefertotheInstallation

Guide for further information about the priority.

 • Refertopage70forhowtodisplaythesetuppageofthecameraandconfigurethesettingsofthecamera.

Display the camera control panel

The panning/tilting, zooming, focus adjustment and iris adjustment can be made on the camera control panel.