Scanner Installation
Installing the Scanner
2-4 Installation Guide for the OpScan iNSIGHT 70 Scanner
Installing the Scanner
The OpScan iNSIGHT 70 scanner is delivered to the customer shrink-wrapped
and up-right on its own four casters. Roll the scanner to its permanent location.
Unpacking the Scanner
To unpack the scanner, do the following:
1. Remove the clear vinyl dust cover.
Caution: Do NOT throw the clear vinyl dust cover away. It can be used to protect the
scanner during periods of non-use or when moving it to another location.
2. Remove the clear plastic shrink-wrap.
3. Remove the packing materials (sheets of paper) located:
• on the transport bed,
• on the hopper tables, and
• between the read head glass.
4. Remove the packing materials (blocks of styro-foam) located:
• between the printer deck and printer cover (holds the printer cover in
place), and
• between the sliding tray for the PC and interior bulkhead (prevents the PC
tray from sliding during shipping).
Spares
A separate box of spares is provided with each scanner. This includes the
following:
• Retard pads
• Pick belts
• Manuals
• A key for the front panel door
Note: For safekeeping, place the key in the hole located below the printer deck and to the
left of the printer cover. Keep the spare retard pads and pick belts in a safe place such as on
the computer shelf inside the scanner cabinet. These spares are used as replacements (See
the Operator's Guide for the OpScan iNSIGHT™ 70 Scanner for instructions on
removing/replacing retard pads and pick belts).
