Chapter 2 Installation
Installing a Desktop LTO-3 Tape Drive
LTO-3 Tape Drive User’s Guide 21
Connecting a
Power Cord
2
Attach the power cord securely to the power connector on the back of the
desktop LTO-3 Tape Drive (see figure 9
).
Installing the LTO
Driver
2
If you intend to use your drive with either the Microsoft Windows Server
2003, Windows XP, or Microsoft Windows 2000 operating system, install
the LTO driver. See the Resource CD.
This driver is not necessary with
commercial backup application software
.
Registering Your
Tape Drive
2
After you install the desktop tape drive, be sure to register it. Registering
your drive ensures that you will receive the latest information about your
drive, as well as other product, service, and support information. For
your convenience, you can register your drive through our Web site at
www.quantum.com/registration
.
