To listen with the headphones.
9
• Ensure that the SPEAKER button is set to off.
• Depending on the signal format which is being input,
you can listen in different Dolby Headphone modes,
stereo mode, etc. with pressing the DSP MODE (<)
/(>) buttons.(For details, refer to “Listening in a
Dolby Headphone mode” on page 31).
26
When CD, VIDEO 1~3 is selected as
an input source
Select the digital or analog input connected
as desired.
4
• When playing back the program sources with
surround sound, refer to “ENJOYING SURROUND
SOUND” on page 30.
• Each time this button is pressed, the corresponding
input is selected as follows ;
A(nalog) o(ptical) 1 o(ptical) 2
c(oaxial) 2 c(oaxial) 1
• When TUNER, TAPE, AUX or EXTERNAL IN is
selected as an input source, the digital input cannot
be selected.
Notes :
• When the selected optical or coaxial digital input is
not connected, the “DIGITAL” indicator flickers,
meaning no sound. (Refer to “ENJOYING
SURROUND SOUND” on page 30.)
• The sound from the component connected to the
selected digital input can be heard regardless of the
selected input source.
Adjust the (overall) volume.
6
Operate the selected component for
playback.
5
• Then “C-EQ OFF” is scrolled.
• Press it again to work, the “C-EQ ON” is scrolled.
• When 96 kHz PCM(2 CH stereo) signals are input
or the SPEAKER button is set to off, the cinema EQ
function does not work.
To compensate for edgy or shrill movie
sound tracks.
7
• “MUTE” will flicker.
• To resume the previous sound level, press it again.
To mute the sound.
8
