19
ENJOYING SURROUND SOUND
Select the desired surround mode.
When selecting the DTS or Dolby Surround mode.
When playing program sources bearing the “ ”,
“ ” or “ ” trademark such as video,
DVD or LD software, the DTS, Dolby Digital (AC-3) or
Dolby Pro Logic mode is automatically selected
according to the input signal.
When playing the Dolby Digital (AC-3) program sources
encoded into 2 channel format, either the Dolby Pro
Logic mode or the Dolby Digital (AC-3) mode is
automatically selected according to the encoding
process. (If the Dolby Digital (AC-3) mode is
automatically selected, pressing the DTS/DOLBY
SURROUND button will select the Dolby Pro Logic
mode.)
To enjoy the DTS or Dolby Digital mode, be sure that
the program source and the corresponding digital input
are selected correctly. If not, no sound will be heard.
Each time the DSP MODE button is pressed, the
surround mode changes as follows;
THEATER
HALL 1
HALL 2
Playing the DTS or Dolby Surround program sources
(bearing the “ ”, “ ” or the
“ ” trademark) in THEATER, HALL 1
or HALL 2 mode will produce better surround effects.
When the 6 CH DIRECT is selected as input source,
the surround mode cannot be selected.
When canceling the surround mode for normal stereo
operation.
When selecting a surround mode between
THEATER, HALL 1 and HALL 2 modes.
Surround sound will not work properly if the signal passes through a graphic equalizer.
Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer.
