A SERVICE OF

logo

IES-1000 Hardware Installation Guide
4-12 Hardware Connections
Connect the top ports of MDF 1 to the telephone company.
4.4.5 LAN Port (Ethernet) Connection
Connect the LAN port of your SAM1008 to an Ethernet WAN switch using a straight-through Category 5 UTP
(Unshielded Twisted Pair) cable with RJ-45 connectors. Connect the other end of the cable to an Ethernet switch.
You may stack multiple IES-1000 units up to the number of ports available on the Ethernet switch as shown next.
Figure 4-12 Stacking Multiple IES-1000 Units
4.4.6 Power Cord
Connect the female end of the power cord to the power receptacle on the front panel of your IES-1000 (to the right
of the fuse housing) as shown next. Connect the other end of the cord to a power outlet. Make sure that no objects
obstruct the airflow of the fans (locatd on the side of the unit).