P314 Broadband Sharing Gateway with 4-Port Switch
8-12 System Information and Diagnosis
Figure 8-11 WAN & LAN DHCP
The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the
connections.
Table 8-4 System Maintenance Menu Diagnostic
Selection
Number
Field
Description
1
Ping Host
Enter 1 to ping any machine (with an IP address) on
your LAN or WAN. Enter its IP address in the
Host IP
Address=
field mentioned in the last row of this
table.
2
WAN DHCP Release Enter 2 to release your WAN DHCP settings.
3
WAN DHCP Renewal
Enter 3 to renew your WAN DHCP settings. The
renewal timeout is 32 seconds.
4
Internet Setup Test
Enter 4 to test your Internet Setup. You can also test
this after configuring
Menu 4 – Internet Access
Setup
.
11
Reboot System
Enter 11 to reboot the Prestige.
Host IP Address=
If you entered 1 above, then enter the IP address of
the machine you want to ping in this field.
