A SERVICE OF

logo

Chapter 35 RIP
XGS4700-48F User’s Guide
327
Network This field displays the IP interface configured on the Switch.
Refer to the section on IP Setup for more information on configuring IP
domains.
Direction Select the RIP direction from the drop-down list box. Choices are Outgoing,
Incoming, Both and None.
Version Select the RIP version from the drop-down list box. Choices are RIP-1, RIP-
2B and RIP-2M.
Apply Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the Save
link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 111 IP Application > RIP (continued)
LABEL DESCRIPTION