Chapter 55 Product Specifications
XGS4700-48F User’s Guide
459
CPU Protection You can limit the rate of protocol control packets (such as ARP,
BPDU and/or IGMP) to be delivered to the CPU on a port.
Error Disable You can set the Switch to take an action (such as to shut down
a port or stop sending packets) on a port when the Switch
detects a pre-configured error. You can also configure the
Switch to automatically undo the action after the error is gone.
Policy Routing Policy routing lets you override the default routing behavior and
alter the packet forwarding based on the pre-defined policy.
ARP Learning You can configure the Switch to update the ARP table with with
an ARP reply or a gratuitous ARP request and/or an APR
request.
Load Sharing Load sharing allows the Switch to forward packets destined to
the same device through different routing paths of equal path
cost.
Table 170 Firmware Specifications (continued)
FEATURE DESCRIPTION
