TO USE YOUR RECEIVER MORE EFFECTIVELY
In order to use your receiver more effectively, the unit enables you to change various settings. All these functions are
programmed in SET mode initiated by pressing FUNC and 0 SET key simultaneously.
Changing the Frequency Step
When the frequency is changed either manually or by searching, it increases or descreses in accordance with the
frequency step assigned or specified. In the initial state (when shipped from the factory), the frequency step is set
automaticaly depending on the band. This is called Auto Step. The frequency step can also be specified from Auto
Step to a specific frequency step from 1KHz to 100KHz.
To change the frequency step:
Hold down FUNC key and press 0 SET Key.
Turn the selector to change Set menu display to „StP Auto“. (Illust. 41-1)
Hold down FUNC key and turn the selector to choose the frequency step from „Auto“ to desired step. (Illust.
41-2)
To complete the setting, press CLEAR PROGRAM key.
For the relationship between the bands and the frequency step for Auto Step, see Frequency/Frequency
Step/Reception Mode Table below.
Frequency range Frequency step Mode
0.50 - 0.52 MHz 1 kHz AM
0.52 - 1.62 MHz 9 kHz AM
1.62 - 29.00 MHz 5 kHz AM
29.00 - 35.53 MHz 10 kHz FM
35.53 - 51.00 MHz 5 kHz AM
51.00 - 54.00 MHz 20 kHz FM
54.00 - 76.00 MHz 5 kHz FM
76.00 - 108.00 MHz 50 kHz WFM
108.00 - 136.05 MHz 25 kHz AM
136.05 - 138.00 MHz 10 kHz FM
138.00 - 142.00 MHz 25 kHz AM
142.00 - 144.00 MHz 10 kHz AM
144.00 - 146.00 MHz 20 kHz FM
146.00 - 170.00 MHz 10 kHz FM
170.00 - 225.00 MHz 50 kHz WFM
225.00 - 250.40 MHz 100 kHz AM
250.40 - 430.00 MHz 12.5 kHz FM
430.00 - 440.00 MHz 20 kHz FM
440.00 - 459.50 MHz 12.5 kHz FM
459.50 - 464.80 MHz 25 kHz WFM
464.80 - 470.00 MHz 12.5 kHz FM
470.00 - 810.00 MHz 25 kHz WFM
810.00 - 940.00 MHz 12.5 kHz FM
940.00 - 1260.00 MHz 100 kHz WFM
1260.00 - 1300.00 MHz 20 kHz FM
Changing the Reception Mode to Match the Frequency (Auto Mode) ;
In the initial state, the frequency mode is set automatically as listed above. This function can be canceled.
Hold down FUNC key and press 0 SET Key.
Turn the selector to change Set menu to display „on AtMode“. (Illust. 42-1)
Hold down FUNC key and turn the selector to change the display from „on“ to „OFF“.
(Illust. 42-2)
