(Illust. 13-2)
Hold down FUNC key and press POWER key.
(A high pitched beep is emitted).
Release the keys and confirm if the original state is displayed in the display. (Illust. 13-3)
Resetting the All Settings (All Reset)
With following procedure, your receiver is set at factory’s original setting. Use this function only when it is necessary
such event as CPU is locked up. All channel memories will be lost and rewritten to factory settings. Refer to the table
below for detail factory setting.
Press POWER key to turn the power off. (Illust. 14-1)
Hold down FUNC key and SQL OFF key and press POWER key. (Illust. 14-2)
(All the items in the display are displayed at once.)
Release the keys and confirm if the original state is displayed. (Illust. 14-3)
Factory Original Setting
PRESET MODE
CH. No. Frequency Mode
1 82.500MHz WFM
2 128.800MHz AM
3 145.000MHz NFM
4 156.800MHz NFM
5 221.750MHz WFM
6 904.0125MHz NFM
7 3.925MHz AM
8 6.055MHz AM
9 9.595MHz AM
To return to operative mode (Expanded Mode), follow the procedure below.
Turn the POWER on.
Press FUNC and 0 SET simultaneously.
Turn rotary selector until the display shows „on PrESEt“
Turn rotary selector by one click while FUNC key pressed.
Your receiver is back to its normal operating state.
Views
Antenna Connection Terminal (BNC Type)
Connect the Antenna to this terminal.
Speaker Cap
Ensure this cap is closed when the speaker terminal is not in use.
External Speaker Terminal
Connect the optional speaker here.
Rotary Selector
Turn this knob to change the frequency, channels or the various settings.
VOL Knob
Turn this knob to adjust the volume.
SQL OFF Key
Squelch is turned off while this key is pressed.
FUNC Key
Various special functions can be set while pressing this key.
Numeric Keys
1 LIGHT Key
l Enters numeric „1“.
