INTRODUCTION
1
1.4 INSERTING AN SD CARD
Datalogic Memor™ provides the possibility to add an SD memory storage card.
To access the SD card slot and to insert the card, proceed as follows:
1. Extract the SD card slot cover from side of the mobile computer. Then
carefully pull it out till unlocking its base as shown in the picture
below:
2. Insert the card with the written part upward and push it in, aided by
the back of the stylus, until it clicks into place.
To remove the SD card, just push it toward the inside, aided by the back of the
stylus, until it clicks; a spring system will return it out.
CAUTION
Follow proper ESD precautions to avoid damaging the SD.
Proper ESD precautions include, but are not limited to, working
on an ESD mat and ensuring that the operator is properly
grounded.
Do not force the card. If you feel resistance, remove the card,
check the orientation, and reinsert it.
Do not use the SD card slot for any other accessories.
3
