DATALOGIC MEMOR™
1 3
3.6.5 Ethernet Settings
Datalogic Memor™ can be connected to an Ethernet network by inserting it into
the Datalogic Memor™ Single Ethernet Cradle.
NOTE
Ethernet communication requires Datalogic Memor™ SW
version 5.51 or later. Verify the software version by tapping on
Software – Version in the Datalogic default home page.
Otherwise, search for the file version.htm under the Windows
folder.
When correctly inserted into the Single Ethernet Cradle, the Ethernet driver
installed on the mobile computer will automatically run.
1. From the Datalogic Memor™ open Internet Explorer>Internet Options and
check use LAN no autodial then OK.
2. From the Datalogic Memor™ > Explorer, enter the IP address or the PC
name in the address bar. You may be required to enter your network
username and password. The LAN connection will take place and you will
be able to see the PC shared folders and exchange files.
If your network provides Internet Service and does not use a proxy server you
can directly access the Internet. Otherwise set the internet proxy parameters
according to your network settings.
In order to configure TCP/IP settings, use the Cradle Manager, downloadable
from the website www.mobile.datalogic.com, as well as the Memor™ Single
Ethernet Cradle User Guide, that describes how to:
- correctly use the Datalogic Memor™ Single Ethernet Cradle;
- configure the cradle by means of the Cradle Manager;
- change the Ethernet Cradle driver behaviour.
34
