![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/a/54/a541f445-9fb9-4f25-a0bc-1f56f8658e51/a541f445-9fb9-4f25-a0bc-1f56f8658e51-bg104.png)
Interworking of DCB Map With DCB Buffer Threshold
Settings
The dcb-input and dcb-output configuration commands are deprecated. You must use the dcp-map
command to create a DCB map to configure priority flow control (PFC) and enhanced transmission
selection (ETS) on Ethernet ports that support converged Ethernet traffic.
Configure the dcb-buffer-threshold command and its related parameters only on ports with either
auto configuration or dcb-map configuration. This command is not supported on existing front-panel
interfaces or stack ports that are configured with the dcb-input or dcb-output commands. Similarly, if
the dcb-buffer-threshold configuration is present on a stack port or any interface, the dcb-input or dcb-
ouput policies cannot be applied on those interfaces.
Example: When the dcb-buffer-threshold policy is applied on interfaces or stack ports with the dcb-input
or dcb-output policies, the following error message is displayed:
%Error: dcb-buffer-threshold not supported on interfaces with deprecated
commands
Example: When the dcb-input or dcb-output policy is configured on interfaces or stack ports with the
dcb-buffer threshold policy, the following error message is displayed:
%Error: Deprecated command is not supported on interfaces with dcb-buffer-
threshold configured
You must not modify the service-class dot1p mappings when any buffer-threshold-policy is configured
on the system.
Dell(conf)#service-class dot1p-mapping dot1p0 3
% Error: PFC buffer-threshold policies conflict with dot1p mappings. Please
remove all dcb-buffer-threshold policies to change mappings.
The show dcb command has been enhanced to display the following additional buffer-related
information:
Dell(conf)#do show dcb
dcb Status : Enabled
PFC Queue Count : 2 --Indicate the PFC queue configured.
Total buffer (lossy + lossless)(in KB): 7787--Total buffer space for lossy and
lossless queues
PFC total buffer (in KB): 6526 --Indicates the total buffer (configured or
default)
PFC shared buffer (in KB): 832--Indicates the shared buffer (Configured or
default)
PFC available buffer ( in KB): 5694--Indicates remaining available buffers for
PFC that are free to be allocated
260
Data Center Bridging (DCB)