Assign the color map, bat-enclave-map to interface .
Displaying DSCP Color Maps
To display DSCP color maps, use the show qos dscp-color-map command in EXEC mode.
Examples for Creating a DSCP Color Map
Display all DSCP color maps.
Dell# show qos dscp-color-map
Dscp-color-map mapONE
yellow 4,7
red 20,30
Dscp-color-map mapTWO
yellow 16,55
Display a specific DSCP color map.
Dell# show qos dscp-color-map mapTWO
Dscp-color-map mapTWO
yellow 16,55
Displaying a DSCP Color Policy Configuration
To display the DSCP color policy configuration for one or all interfaces, use the show qos dscp-
color-policy {summary [
interface] | detail {interface}} command in EXEC mode.
summary: Displays summary information about a color policy on one or more interfaces.
detail: Displays detailed color policy information on an interface
interface: Enter the name of the interface that has the color policy configured.
Examples for Displaying a DSCP Color Policy
Display summary information about a color policy for one or more interfaces.
Display summary information about a color policy for a specific interface.
Display detailed information about a color policy for a specific interface
Classify Traffic
Class maps differentiate traffic so that you can apply separate quality of service policies to different types
of traffic.
For both class maps, Layer 2 and Layer 3, the Dell Networking OS matches packets against match criteria
in the order that you configure them.
Quality of Service (QoS)
731
