116 Command Groups
Router Discovery Protocol
show ip pimsm Displays the system-wide information for PIM-
SM.
PE
show ip pimsm interface Displays interface information for PIM-SM on
the specified interface.
PE
show ip pimsm neighbor Displays neighbor information for PIM-SM on
the specified interface.
PE
show ip pimsm rphash Displays the RP router being selected from the
set of active RP routers.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
ip irdp Enables Router Discovery on an interface. IC
ip irdp address Configures the address that the interface uses
to send the router discovery advertisements.
IC
ip irdp holdtime Configures the value, in seconds, of the
holdtime field of the router advertisement sent
from this interface.
IC
ip irdp maxadvertinterval Configures the maximum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp minadvertinterval Configures the minimum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp preference Configures the preference of the address as a
default router address relative to other router
addresses on the same subnet.
IC
show ip irdp Displays the router discovery information for all
interfaces, or for a specified interface.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
